2021-2026 Ford Bronco to Bronco Raptor Hood Conversion (OEM) | Painted to Match | Ready to Install
2021-2026 Ford Bronco to Bronco Raptor Hood Conversion (OEM) | Painted to Match | Ready to Install
2021-2026 Ford Bronco to Bronco Raptor Hood Conversion (OEM) | Painted to Match | Ready to Install
Aggressive Bronco Raptor Styling. OEM Appearance. Professionally Painted.
Upgrade your 2021–2026 Ford Bronco with a genuine OEM Bronco Raptor Hood Assembly, professionally refinished in-house by ReveMoto using premium Lesonal automotive coatings by AkzoNobel.
Backed by the ReveMoto Paint Match Guarantee, our dedicated paint specialists continuously refine proprietary paint formulas and custom paint variants to help deliver a paint match that blends seamlessly with your vehicle's existing finish - even on vehicles affected by years of paint aging and sun exposure.
Using premium Lesonal automotive coatings by AkzoNobel, every hood is refinished in-house using ReveMoto's continuously refined proprietary paint formulas, developed through more than 12 years of paint matching experience. The result is a professionally painted hood designed to blend seamlessly with your vehicle while arriving ready to install - eliminating the hassle of coordinating local paint work or body shop visits.
Featuring the Bronco Raptor's signature raised center section, bold hood extractor styling, and sculpted design, this conversion transforms the appearance of your Bronco while maintaining OEM fit and factory mounting locations. Whether your Bronco is equipped with the Sasquatch Package, built for overlanding, or customized as an OEM+ build, this conversion delivers one of the most noticeable exterior upgrades available.
While this conversion utilizes genuine OEM Bronco Raptor components, it is intended as a cosmetic appearance upgrade and does not claim any functional, cooling, or performance improvements over the original factory hood installed on your Bronco.
Why Upgrade to a Bronco Raptor Hood?
- Achieve the aggressive, authentic Bronco Raptor appearance
- Premium OEM Bronco Raptor hood styling
- Professionally refinished in-house using premium Lesonal automotive coatings by AkzoNobel and backed by the ReveMoto Paint Match Guarantee.
- Genuine OEM Bronco Raptor components
- Direct OEM replacement using factory mounting locations
- Includes new OEM hood hinges, lift cylinders, and installation hardware
- No cutting, drilling, wiring, or vehicle programming required
- Professionally refinished and quality inspected before shipment
- Backed by ReveMoto's Lifetime Paint Warranty
Whether you're replacing a damaged hood, performing a Bronco hood replacement, or upgrading your Bronco's appearance of a Bronco Raptor hood conversion, this genuine OEM hood assembly delivers factory-quality fitment with the aggressive styling of the Bronco Raptor. Professionally refinished by ReveMoto and delivered ready to install, it's one of the easiest ways to transform the appearance of your Bronco while maintaining OEM quality and factory mounting locations.
Vehicle Compatibility
Fits 2021-2026 Ford Bronco (Non-Raptor Models), including:
- Base*
- Big Bend
- Black Diamond
- Outer Banks
- Badlands
- Wildtrak
- Everglades
- Heritage Edition
- Heritage Limited Edition
- First Edition
- Stroppe Edition (2026)
- Sasquatch-equipped models
Compatible with:
- 2-Door Bronco
- 4-Door Bronco
- Hardtop
- Soft Top
- Sasquatch Package
- Standard suspension
- Standard Bronco front fenders
Not compatible with Bronco Raptor models.
Proven Bronco Raptor Hood Conversion
Bronco enthusiasts have successfully completed Bronco Raptor hood conversions using OEM Bronco Raptor hood components and factory mounting locations. This conversion has become one of the most popular OEM appearance upgrades for Bronco owners seeking a more aggressive front-end design without modifying the vehicle's body structure.
VIN Verification Required for Guaranteed Fitment
A valid 17-digit VIN is required upon order to verify compatibility and ensure proper fitment before production begins.
Because every Bronco Raptor Hood Conversion is professionally refinished using ReveMoto's custom paint matching process, VIN verification allows our fitment specialists to confirm the correct hood configuration before production begins. Our paint team then applies the appropriate proprietary paint variant to help achieve the best possible paint match for your vehicle.
Why We Require Your VIN
- Confirm compatibility with your Bronco
- Verify hood assembly requirements
- Identify applicable model-year revisions
- Ensure OEM fitment using factory mounting locations
- Prevent ordering incorrect components
- Maintain ReveMoto's quality and fitment standards
Orders cannot proceed to production until VIN verification has been completed.
Direct Bolt-On Installation
The Bronco Raptor Hood Conversion is designed as a direct OEM replacement using factory mounting locations. Installation does not require cutting, drilling, fabrication, wiring, or vehicle programming.
The conversion utilizes OEM mounting points for a straightforward installation while preserving factory hood alignment and operation. Minor hood alignment adjustments may be required during installation to achieve optimal panel gaps, as with any OEM hood replacement.
What's Included
Your 2021–2026 Ford Bronco to Bronco Raptor Hood Conversion includes genuine OEM Bronco Raptor components professionally refinished and prepared for installation.
- 1 × OEM Bronco Raptor Hood Assembly – Professionally refinished in-house using ReveMoto's custom paint matching process and premium Lesonal automotive coatings by AkzoNobel.
- 1 × OEM Bronco Raptor Hood Scoop / Heat Extractor Assembly – textured matte black finish (standard). Optional Painted-to-Match Hood Scoop available.
- 1 × Left Hood Hinge
- 1 × Right Hood Hinge
- 1 × Left Hood Lift Cylinder (Gas Strut)
- 1 × Right Hood Lift Cylinder (Gas Strut)
- 4 × Hood-to-Hinge Mounting Nuts
- 2 × Hinge-to-Body Mounting Bolts
- 4 × Side Rail Assembly Bolts
Every painted component is professionally refinished, inspected for paint match accuracy, and quality checked before shipment. Every conversion kit is carefully quality inspected, securely packaged, and shipped ready for installation.
Transfers from Your Original Hood
The following factory components are transferred from your existing Bronco during installation:
- Hood latch
- Hood striker
- Hood insulation pad
- Hood washer nozzles
- Hood bump stops
New OEM hood hinges, lift cylinders, and installation hardware are included with this conversion kit.
Why We Include New OEM Hardware
Unlike many hood replacement kits that require transferring worn or previously used components, ReveMoto includes new OEM mounting components to simplify installation and help ensure proper hood alignment and operation.
Benefits of New OEM Components
- Complete Installation Package – Includes the essential OEM hardware required for installation.
- Proper Hood Alignment – New hinges help maintain factory panel gaps and consistent hood fitment.
- Smooth Hood Operation – New OEM lift cylinders provide reliable hood support and opening performance.
- Reduced Installation Time – Eliminates the need to remove and reuse aging hardware whenever possible.
- Factory OEM Quality – Genuine OEM components engineered specifically for the Bronco Raptor hood assembly.
Why the Hood Scoop Remains Textured Matte Black
Every Bronco Raptor Hood Conversion includes a genuine OEM Bronco Raptor hood scoop (heat extractor) in its factory textured matte black finish. This is the same finish used on the factory Bronco Raptor and is intentionally designed to contrast with the painted hood for an authentic OEM appearance.
Advantages of the OEM Textured Matte Black Finish
- Authentic Bronco Raptor Styling – Matches the factory appearance found on OEM Bronco Raptor models.
- Superior Durability – The textured finish is naturally more resistant to rock chips, scratches, and everyday wear than painted plastic.
- No Paint Chipping or Peeling – Because the scoop is left in its original molded finish, there is no painted surface on the exposed trim that could chip or delaminate over time.
- Low Maintenance – The matte texture helps conceal light dust, fingerprints, and minor scuffs, making it ideal for daily driving, overlanding, and off-road use.
- Bold Visual Contrast – The textured black scoop accentuates the Bronco Raptor hood's raised center section and aggressive heat extractor design, creating the distinctive look enthusiasts expect.
For customers seeking a more customized appearance, ReveMoto also offers an optional Painted-to-Match Hood Scoop, professionally refinished using premium Lesonal automotive paint while retaining the OEM satin black vent mesh for subtle contrast.
Installation
Typical installation takes approximately 1–2 hours using basic hand tools.
Existing hood latch, hood striker, hood insulation pad, hood washer nozzles, and hood bump stops are transferred from the original hood. New OEM hood hinges, lift cylinders, and installation hardware are included with this conversion kit.
No cutting, drilling, wiring, or vehicle programming is required.
Frequently Asked Questions
Q: Does this Bronco Raptor Hood Conversion fit all 2021–2026 Ford Bronco models?
A: This conversion is designed for 2021–2026 Ford Bronco non-Raptor models, including Base, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, Everglades, Heritage Edition, Heritage Limited Edition, First Edition, and Stroppe Edition. It is compatible with both 2-door and 4-door Broncos, including vehicles equipped with the Sasquatch Package.
Q: Is this a genuine OEM Bronco Raptor hood?
A: Yes. This conversion utilizes genuine OEM Bronco Raptor hood components, professionally refinished in-house by ReveMoto and prepared for installation.
Q: Is this a direct bolt-on installation?
A: Yes. The hood is designed to install using factory mounting locations. No cutting, drilling, fabrication, wiring, or vehicle programming is required.
Q: Does this conversion require a Bronco Raptor grille or fenders?
A: No. The hood is designed to install on compatible non-Raptor Broncos using factory mounting locations. Replacing the grille or fenders is not required to complete the hood conversion.
Q: Does this fit the Bronco Raptor?
A: No. This conversion is intended for standard Ford Bronco models and is not designed for vehicles already equipped with the Bronco Raptor hood.
Q: What components are transferred from my original hood?
A: The following components are transferred during installation:
- Hood latch
- Hood striker
- Hood insulation pad
- Hood washer nozzles
- Hood bump stops
New OEM hood hinges, lift cylinders, and installation hardware are included with the conversion kit.
Q: Why is the hood scoop textured matte black?
A: The OEM Bronco Raptor hood scoop is manufactured with a textured matte black finish to match the factory Bronco Raptor appearance. This finish offers excellent durability, resists scratches and rock chips better than painted plastic, requires less maintenance, and provides the bold contrast that defines the Bronco Raptor hood design.
Q: Can the hood scoop be painted?
A: Yes. Customers may choose our optional Painted-to-Match Hood Scoop upgrade for a more seamless body-color appearance while retaining the OEM satin black vent mesh.
Q: How does ReveMoto's Paint Match Guarantee work?
A: For more than 12 years, ReveMoto has continuously refined its paint matching process through a dedicated in-house Research & Development team. Our proprietary paint formulas and custom paint variants are continually updated to improve paint match accuracy. Every painted hood is professionally refinished using premium Lesonal automotive coatings by AkzoNobel and backed by the ReveMoto Paint Match Guarantee and Lifetime Paint Warranty.
Q: Why is VIN verification required?
A: Your VIN allows our fitment specialists to verify the correct hood configuration and ensure compatibility before production begins. It also helps our paint team apply the appropriate proprietary paint variant for the best possible paint match.
Q: Why does ReveMoto require a VIN?
A: Ford made running production changes across multiple Bronco model years. Your VIN allows our fitment specialists to verify the correct hood configuration, ensure compatibility, and confirm the appropriate OEM components before production begins. It also helps our paint team apply the correct proprietary paint variant for the best possible paint match.
Q: How long does installation take?
A: Installation typically takes 1–2 hours using basic hand tools. Because this is a direct OEM replacement, no cutting, drilling, or vehicle programming is required.
Q: Does the hood arrive painted and ready to install?
A: Yes. Every Bronco Raptor Hood Conversion is professionally refinished in-house using premium Lesonal automotive coatings by AkzoNobel, quality inspected, securely packaged, and shipped ready for installation.
The ReveMoto Difference
Every ReveMoto Bronco Raptor Hood Conversion is professionally refinished in-house using premium Lesonal automotive coatings by AkzoNobel, supported by more than 12 years of paint matching experience, a dedicated in-house Research & Development team, and continuously refined proprietary paint formulas developed to deliver exceptional paint match accuracy. Every hood is carefully inspected before shipment to ensure outstanding paint quality, OEM fitment, and the level of craftsmanship customers have come to expect from ReveMoto.
Every painted hood undergoes:
✔ Paint Match Verification
✔ Paint Thickness Inspection
✔ Final Quality Control Review
✔ Protective Transit Packaging
✔ Lifetime Paint Warranty Coverage
Original: $3,486.00
-65%$3,486.00
$1,220.102021-2026 Ford Bronco to Bronco Raptor Hood Conversion (OEM) | Painted to Match | Ready to Install
2021-2026 Ford Bronco to Bronco Raptor Hood Conversion (OEM) | Painted to Match | Ready to Install
Aggressive Bronco Raptor Styling. OEM Appearance. Professionally Painted.
Upgrade your 2021–2026 Ford Bronco with a genuine OEM Bronco Raptor Hood Assembly, professionally refinished in-house by ReveMoto using premium Lesonal automotive coatings by AkzoNobel.
Backed by the ReveMoto Paint Match Guarantee, our dedicated paint specialists continuously refine proprietary paint formulas and custom paint variants to help deliver a paint match that blends seamlessly with your vehicle's existing finish - even on vehicles affected by years of paint aging and sun exposure.
Using premium Lesonal automotive coatings by AkzoNobel, every hood is refinished in-house using ReveMoto's continuously refined proprietary paint formulas, developed through more than 12 years of paint matching experience. The result is a professionally painted hood designed to blend seamlessly with your vehicle while arriving ready to install - eliminating the hassle of coordinating local paint work or body shop visits.
Featuring the Bronco Raptor's signature raised center section, bold hood extractor styling, and sculpted design, this conversion transforms the appearance of your Bronco while maintaining OEM fit and factory mounting locations. Whether your Bronco is equipped with the Sasquatch Package, built for overlanding, or customized as an OEM+ build, this conversion delivers one of the most noticeable exterior upgrades available.
While this conversion utilizes genuine OEM Bronco Raptor components, it is intended as a cosmetic appearance upgrade and does not claim any functional, cooling, or performance improvements over the original factory hood installed on your Bronco.
Why Upgrade to a Bronco Raptor Hood?
- Achieve the aggressive, authentic Bronco Raptor appearance
- Premium OEM Bronco Raptor hood styling
- Professionally refinished in-house using premium Lesonal automotive coatings by AkzoNobel and backed by the ReveMoto Paint Match Guarantee.
- Genuine OEM Bronco Raptor components
- Direct OEM replacement using factory mounting locations
- Includes new OEM hood hinges, lift cylinders, and installation hardware
- No cutting, drilling, wiring, or vehicle programming required
- Professionally refinished and quality inspected before shipment
- Backed by ReveMoto's Lifetime Paint Warranty
Whether you're replacing a damaged hood, performing a Bronco hood replacement, or upgrading your Bronco's appearance of a Bronco Raptor hood conversion, this genuine OEM hood assembly delivers factory-quality fitment with the aggressive styling of the Bronco Raptor. Professionally refinished by ReveMoto and delivered ready to install, it's one of the easiest ways to transform the appearance of your Bronco while maintaining OEM quality and factory mounting locations.
Vehicle Compatibility
Fits 2021-2026 Ford Bronco (Non-Raptor Models), including:
- Base*
- Big Bend
- Black Diamond
- Outer Banks
- Badlands
- Wildtrak
- Everglades
- Heritage Edition
- Heritage Limited Edition
- First Edition
- Stroppe Edition (2026)
- Sasquatch-equipped models
Compatible with:
- 2-Door Bronco
- 4-Door Bronco
- Hardtop
- Soft Top
- Sasquatch Package
- Standard suspension
- Standard Bronco front fenders
Not compatible with Bronco Raptor models.
Proven Bronco Raptor Hood Conversion
Bronco enthusiasts have successfully completed Bronco Raptor hood conversions using OEM Bronco Raptor hood components and factory mounting locations. This conversion has become one of the most popular OEM appearance upgrades for Bronco owners seeking a more aggressive front-end design without modifying the vehicle's body structure.
VIN Verification Required for Guaranteed Fitment
A valid 17-digit VIN is required upon order to verify compatibility and ensure proper fitment before production begins.
Because every Bronco Raptor Hood Conversion is professionally refinished using ReveMoto's custom paint matching process, VIN verification allows our fitment specialists to confirm the correct hood configuration before production begins. Our paint team then applies the appropriate proprietary paint variant to help achieve the best possible paint match for your vehicle.
Why We Require Your VIN
- Confirm compatibility with your Bronco
- Verify hood assembly requirements
- Identify applicable model-year revisions
- Ensure OEM fitment using factory mounting locations
- Prevent ordering incorrect components
- Maintain ReveMoto's quality and fitment standards
Orders cannot proceed to production until VIN verification has been completed.
Direct Bolt-On Installation
The Bronco Raptor Hood Conversion is designed as a direct OEM replacement using factory mounting locations. Installation does not require cutting, drilling, fabrication, wiring, or vehicle programming.
The conversion utilizes OEM mounting points for a straightforward installation while preserving factory hood alignment and operation. Minor hood alignment adjustments may be required during installation to achieve optimal panel gaps, as with any OEM hood replacement.
What's Included
Your 2021–2026 Ford Bronco to Bronco Raptor Hood Conversion includes genuine OEM Bronco Raptor components professionally refinished and prepared for installation.
- 1 × OEM Bronco Raptor Hood Assembly – Professionally refinished in-house using ReveMoto's custom paint matching process and premium Lesonal automotive coatings by AkzoNobel.
- 1 × OEM Bronco Raptor Hood Scoop / Heat Extractor Assembly – textured matte black finish (standard). Optional Painted-to-Match Hood Scoop available.
- 1 × Left Hood Hinge
- 1 × Right Hood Hinge
- 1 × Left Hood Lift Cylinder (Gas Strut)
- 1 × Right Hood Lift Cylinder (Gas Strut)
- 4 × Hood-to-Hinge Mounting Nuts
- 2 × Hinge-to-Body Mounting Bolts
- 4 × Side Rail Assembly Bolts
Every painted component is professionally refinished, inspected for paint match accuracy, and quality checked before shipment. Every conversion kit is carefully quality inspected, securely packaged, and shipped ready for installation.
Transfers from Your Original Hood
The following factory components are transferred from your existing Bronco during installation:
- Hood latch
- Hood striker
- Hood insulation pad
- Hood washer nozzles
- Hood bump stops
New OEM hood hinges, lift cylinders, and installation hardware are included with this conversion kit.
Why We Include New OEM Hardware
Unlike many hood replacement kits that require transferring worn or previously used components, ReveMoto includes new OEM mounting components to simplify installation and help ensure proper hood alignment and operation.
Benefits of New OEM Components
- Complete Installation Package – Includes the essential OEM hardware required for installation.
- Proper Hood Alignment – New hinges help maintain factory panel gaps and consistent hood fitment.
- Smooth Hood Operation – New OEM lift cylinders provide reliable hood support and opening performance.
- Reduced Installation Time – Eliminates the need to remove and reuse aging hardware whenever possible.
- Factory OEM Quality – Genuine OEM components engineered specifically for the Bronco Raptor hood assembly.
Why the Hood Scoop Remains Textured Matte Black
Every Bronco Raptor Hood Conversion includes a genuine OEM Bronco Raptor hood scoop (heat extractor) in its factory textured matte black finish. This is the same finish used on the factory Bronco Raptor and is intentionally designed to contrast with the painted hood for an authentic OEM appearance.
Advantages of the OEM Textured Matte Black Finish
- Authentic Bronco Raptor Styling – Matches the factory appearance found on OEM Bronco Raptor models.
- Superior Durability – The textured finish is naturally more resistant to rock chips, scratches, and everyday wear than painted plastic.
- No Paint Chipping or Peeling – Because the scoop is left in its original molded finish, there is no painted surface on the exposed trim that could chip or delaminate over time.
- Low Maintenance – The matte texture helps conceal light dust, fingerprints, and minor scuffs, making it ideal for daily driving, overlanding, and off-road use.
- Bold Visual Contrast – The textured black scoop accentuates the Bronco Raptor hood's raised center section and aggressive heat extractor design, creating the distinctive look enthusiasts expect.
For customers seeking a more customized appearance, ReveMoto also offers an optional Painted-to-Match Hood Scoop, professionally refinished using premium Lesonal automotive paint while retaining the OEM satin black vent mesh for subtle contrast.
Installation
Typical installation takes approximately 1–2 hours using basic hand tools.
Existing hood latch, hood striker, hood insulation pad, hood washer nozzles, and hood bump stops are transferred from the original hood. New OEM hood hinges, lift cylinders, and installation hardware are included with this conversion kit.
No cutting, drilling, wiring, or vehicle programming is required.
Frequently Asked Questions
Q: Does this Bronco Raptor Hood Conversion fit all 2021–2026 Ford Bronco models?
A: This conversion is designed for 2021–2026 Ford Bronco non-Raptor models, including Base, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, Everglades, Heritage Edition, Heritage Limited Edition, First Edition, and Stroppe Edition. It is compatible with both 2-door and 4-door Broncos, including vehicles equipped with the Sasquatch Package.
Q: Is this a genuine OEM Bronco Raptor hood?
A: Yes. This conversion utilizes genuine OEM Bronco Raptor hood components, professionally refinished in-house by ReveMoto and prepared for installation.
Q: Is this a direct bolt-on installation?
A: Yes. The hood is designed to install using factory mounting locations. No cutting, drilling, fabrication, wiring, or vehicle programming is required.
Q: Does this conversion require a Bronco Raptor grille or fenders?
A: No. The hood is designed to install on compatible non-Raptor Broncos using factory mounting locations. Replacing the grille or fenders is not required to complete the hood conversion.
Q: Does this fit the Bronco Raptor?
A: No. This conversion is intended for standard Ford Bronco models and is not designed for vehicles already equipped with the Bronco Raptor hood.
Q: What components are transferred from my original hood?
A: The following components are transferred during installation:
- Hood latch
- Hood striker
- Hood insulation pad
- Hood washer nozzles
- Hood bump stops
New OEM hood hinges, lift cylinders, and installation hardware are included with the conversion kit.
Q: Why is the hood scoop textured matte black?
A: The OEM Bronco Raptor hood scoop is manufactured with a textured matte black finish to match the factory Bronco Raptor appearance. This finish offers excellent durability, resists scratches and rock chips better than painted plastic, requires less maintenance, and provides the bold contrast that defines the Bronco Raptor hood design.
Q: Can the hood scoop be painted?
A: Yes. Customers may choose our optional Painted-to-Match Hood Scoop upgrade for a more seamless body-color appearance while retaining the OEM satin black vent mesh.
Q: How does ReveMoto's Paint Match Guarantee work?
A: For more than 12 years, ReveMoto has continuously refined its paint matching process through a dedicated in-house Research & Development team. Our proprietary paint formulas and custom paint variants are continually updated to improve paint match accuracy. Every painted hood is professionally refinished using premium Lesonal automotive coatings by AkzoNobel and backed by the ReveMoto Paint Match Guarantee and Lifetime Paint Warranty.
Q: Why is VIN verification required?
A: Your VIN allows our fitment specialists to verify the correct hood configuration and ensure compatibility before production begins. It also helps our paint team apply the appropriate proprietary paint variant for the best possible paint match.
Q: Why does ReveMoto require a VIN?
A: Ford made running production changes across multiple Bronco model years. Your VIN allows our fitment specialists to verify the correct hood configuration, ensure compatibility, and confirm the appropriate OEM components before production begins. It also helps our paint team apply the correct proprietary paint variant for the best possible paint match.
Q: How long does installation take?
A: Installation typically takes 1–2 hours using basic hand tools. Because this is a direct OEM replacement, no cutting, drilling, or vehicle programming is required.
Q: Does the hood arrive painted and ready to install?
A: Yes. Every Bronco Raptor Hood Conversion is professionally refinished in-house using premium Lesonal automotive coatings by AkzoNobel, quality inspected, securely packaged, and shipped ready for installation.
The ReveMoto Difference
Every ReveMoto Bronco Raptor Hood Conversion is professionally refinished in-house using premium Lesonal automotive coatings by AkzoNobel, supported by more than 12 years of paint matching experience, a dedicated in-house Research & Development team, and continuously refined proprietary paint formulas developed to deliver exceptional paint match accuracy. Every hood is carefully inspected before shipment to ensure outstanding paint quality, OEM fitment, and the level of craftsmanship customers have come to expect from ReveMoto.
Every painted hood undergoes:
✔ Paint Match Verification
✔ Paint Thickness Inspection
✔ Final Quality Control Review
✔ Protective Transit Packaging
✔ Lifetime Paint Warranty Coverage
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
2021-2026 Ford Bronco to Bronco Raptor Hood Conversion (OEM) | Painted to Match | Ready to Install
Aggressive Bronco Raptor Styling. OEM Appearance. Professionally Painted.
Upgrade your 2021–2026 Ford Bronco with a genuine OEM Bronco Raptor Hood Assembly, professionally refinished in-house by ReveMoto using premium Lesonal automotive coatings by AkzoNobel.
Backed by the ReveMoto Paint Match Guarantee, our dedicated paint specialists continuously refine proprietary paint formulas and custom paint variants to help deliver a paint match that blends seamlessly with your vehicle's existing finish - even on vehicles affected by years of paint aging and sun exposure.
Using premium Lesonal automotive coatings by AkzoNobel, every hood is refinished in-house using ReveMoto's continuously refined proprietary paint formulas, developed through more than 12 years of paint matching experience. The result is a professionally painted hood designed to blend seamlessly with your vehicle while arriving ready to install - eliminating the hassle of coordinating local paint work or body shop visits.
Featuring the Bronco Raptor's signature raised center section, bold hood extractor styling, and sculpted design, this conversion transforms the appearance of your Bronco while maintaining OEM fit and factory mounting locations. Whether your Bronco is equipped with the Sasquatch Package, built for overlanding, or customized as an OEM+ build, this conversion delivers one of the most noticeable exterior upgrades available.
While this conversion utilizes genuine OEM Bronco Raptor components, it is intended as a cosmetic appearance upgrade and does not claim any functional, cooling, or performance improvements over the original factory hood installed on your Bronco.
Why Upgrade to a Bronco Raptor Hood?
- Achieve the aggressive, authentic Bronco Raptor appearance
- Premium OEM Bronco Raptor hood styling
- Professionally refinished in-house using premium Lesonal automotive coatings by AkzoNobel and backed by the ReveMoto Paint Match Guarantee.
- Genuine OEM Bronco Raptor components
- Direct OEM replacement using factory mounting locations
- Includes new OEM hood hinges, lift cylinders, and installation hardware
- No cutting, drilling, wiring, or vehicle programming required
- Professionally refinished and quality inspected before shipment
- Backed by ReveMoto's Lifetime Paint Warranty
Whether you're replacing a damaged hood, performing a Bronco hood replacement, or upgrading your Bronco's appearance of a Bronco Raptor hood conversion, this genuine OEM hood assembly delivers factory-quality fitment with the aggressive styling of the Bronco Raptor. Professionally refinished by ReveMoto and delivered ready to install, it's one of the easiest ways to transform the appearance of your Bronco while maintaining OEM quality and factory mounting locations.
Vehicle Compatibility
Fits 2021-2026 Ford Bronco (Non-Raptor Models), including:
- Base*
- Big Bend
- Black Diamond
- Outer Banks
- Badlands
- Wildtrak
- Everglades
- Heritage Edition
- Heritage Limited Edition
- First Edition
- Stroppe Edition (2026)
- Sasquatch-equipped models
Compatible with:
- 2-Door Bronco
- 4-Door Bronco
- Hardtop
- Soft Top
- Sasquatch Package
- Standard suspension
- Standard Bronco front fenders
Not compatible with Bronco Raptor models.
Proven Bronco Raptor Hood Conversion
Bronco enthusiasts have successfully completed Bronco Raptor hood conversions using OEM Bronco Raptor hood components and factory mounting locations. This conversion has become one of the most popular OEM appearance upgrades for Bronco owners seeking a more aggressive front-end design without modifying the vehicle's body structure.
VIN Verification Required for Guaranteed Fitment
A valid 17-digit VIN is required upon order to verify compatibility and ensure proper fitment before production begins.
Because every Bronco Raptor Hood Conversion is professionally refinished using ReveMoto's custom paint matching process, VIN verification allows our fitment specialists to confirm the correct hood configuration before production begins. Our paint team then applies the appropriate proprietary paint variant to help achieve the best possible paint match for your vehicle.
Why We Require Your VIN
- Confirm compatibility with your Bronco
- Verify hood assembly requirements
- Identify applicable model-year revisions
- Ensure OEM fitment using factory mounting locations
- Prevent ordering incorrect components
- Maintain ReveMoto's quality and fitment standards
Orders cannot proceed to production until VIN verification has been completed.
Direct Bolt-On Installation
The Bronco Raptor Hood Conversion is designed as a direct OEM replacement using factory mounting locations. Installation does not require cutting, drilling, fabrication, wiring, or vehicle programming.
The conversion utilizes OEM mounting points for a straightforward installation while preserving factory hood alignment and operation. Minor hood alignment adjustments may be required during installation to achieve optimal panel gaps, as with any OEM hood replacement.
What's Included
Your 2021–2026 Ford Bronco to Bronco Raptor Hood Conversion includes genuine OEM Bronco Raptor components professionally refinished and prepared for installation.
- 1 × OEM Bronco Raptor Hood Assembly – Professionally refinished in-house using ReveMoto's custom paint matching process and premium Lesonal automotive coatings by AkzoNobel.
- 1 × OEM Bronco Raptor Hood Scoop / Heat Extractor Assembly – textured matte black finish (standard). Optional Painted-to-Match Hood Scoop available.
- 1 × Left Hood Hinge
- 1 × Right Hood Hinge
- 1 × Left Hood Lift Cylinder (Gas Strut)
- 1 × Right Hood Lift Cylinder (Gas Strut)
- 4 × Hood-to-Hinge Mounting Nuts
- 2 × Hinge-to-Body Mounting Bolts
- 4 × Side Rail Assembly Bolts
Every painted component is professionally refinished, inspected for paint match accuracy, and quality checked before shipment. Every conversion kit is carefully quality inspected, securely packaged, and shipped ready for installation.
Transfers from Your Original Hood
The following factory components are transferred from your existing Bronco during installation:
- Hood latch
- Hood striker
- Hood insulation pad
- Hood washer nozzles
- Hood bump stops
New OEM hood hinges, lift cylinders, and installation hardware are included with this conversion kit.
Why We Include New OEM Hardware
Unlike many hood replacement kits that require transferring worn or previously used components, ReveMoto includes new OEM mounting components to simplify installation and help ensure proper hood alignment and operation.
Benefits of New OEM Components
- Complete Installation Package – Includes the essential OEM hardware required for installation.
- Proper Hood Alignment – New hinges help maintain factory panel gaps and consistent hood fitment.
- Smooth Hood Operation – New OEM lift cylinders provide reliable hood support and opening performance.
- Reduced Installation Time – Eliminates the need to remove and reuse aging hardware whenever possible.
- Factory OEM Quality – Genuine OEM components engineered specifically for the Bronco Raptor hood assembly.
Why the Hood Scoop Remains Textured Matte Black
Every Bronco Raptor Hood Conversion includes a genuine OEM Bronco Raptor hood scoop (heat extractor) in its factory textured matte black finish. This is the same finish used on the factory Bronco Raptor and is intentionally designed to contrast with the painted hood for an authentic OEM appearance.
Advantages of the OEM Textured Matte Black Finish
- Authentic Bronco Raptor Styling – Matches the factory appearance found on OEM Bronco Raptor models.
- Superior Durability – The textured finish is naturally more resistant to rock chips, scratches, and everyday wear than painted plastic.
- No Paint Chipping or Peeling – Because the scoop is left in its original molded finish, there is no painted surface on the exposed trim that could chip or delaminate over time.
- Low Maintenance – The matte texture helps conceal light dust, fingerprints, and minor scuffs, making it ideal for daily driving, overlanding, and off-road use.
- Bold Visual Contrast – The textured black scoop accentuates the Bronco Raptor hood's raised center section and aggressive heat extractor design, creating the distinctive look enthusiasts expect.
For customers seeking a more customized appearance, ReveMoto also offers an optional Painted-to-Match Hood Scoop, professionally refinished using premium Lesonal automotive paint while retaining the OEM satin black vent mesh for subtle contrast.
Installation
Typical installation takes approximately 1–2 hours using basic hand tools.
Existing hood latch, hood striker, hood insulation pad, hood washer nozzles, and hood bump stops are transferred from the original hood. New OEM hood hinges, lift cylinders, and installation hardware are included with this conversion kit.
No cutting, drilling, wiring, or vehicle programming is required.
Frequently Asked Questions
Q: Does this Bronco Raptor Hood Conversion fit all 2021–2026 Ford Bronco models?
A: This conversion is designed for 2021–2026 Ford Bronco non-Raptor models, including Base, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, Everglades, Heritage Edition, Heritage Limited Edition, First Edition, and Stroppe Edition. It is compatible with both 2-door and 4-door Broncos, including vehicles equipped with the Sasquatch Package.
Q: Is this a genuine OEM Bronco Raptor hood?
A: Yes. This conversion utilizes genuine OEM Bronco Raptor hood components, professionally refinished in-house by ReveMoto and prepared for installation.
Q: Is this a direct bolt-on installation?
A: Yes. The hood is designed to install using factory mounting locations. No cutting, drilling, fabrication, wiring, or vehicle programming is required.
Q: Does this conversion require a Bronco Raptor grille or fenders?
A: No. The hood is designed to install on compatible non-Raptor Broncos using factory mounting locations. Replacing the grille or fenders is not required to complete the hood conversion.
Q: Does this fit the Bronco Raptor?
A: No. This conversion is intended for standard Ford Bronco models and is not designed for vehicles already equipped with the Bronco Raptor hood.
Q: What components are transferred from my original hood?
A: The following components are transferred during installation:
- Hood latch
- Hood striker
- Hood insulation pad
- Hood washer nozzles
- Hood bump stops
New OEM hood hinges, lift cylinders, and installation hardware are included with the conversion kit.
Q: Why is the hood scoop textured matte black?
A: The OEM Bronco Raptor hood scoop is manufactured with a textured matte black finish to match the factory Bronco Raptor appearance. This finish offers excellent durability, resists scratches and rock chips better than painted plastic, requires less maintenance, and provides the bold contrast that defines the Bronco Raptor hood design.
Q: Can the hood scoop be painted?
A: Yes. Customers may choose our optional Painted-to-Match Hood Scoop upgrade for a more seamless body-color appearance while retaining the OEM satin black vent mesh.
Q: How does ReveMoto's Paint Match Guarantee work?
A: For more than 12 years, ReveMoto has continuously refined its paint matching process through a dedicated in-house Research & Development team. Our proprietary paint formulas and custom paint variants are continually updated to improve paint match accuracy. Every painted hood is professionally refinished using premium Lesonal automotive coatings by AkzoNobel and backed by the ReveMoto Paint Match Guarantee and Lifetime Paint Warranty.
Q: Why is VIN verification required?
A: Your VIN allows our fitment specialists to verify the correct hood configuration and ensure compatibility before production begins. It also helps our paint team apply the appropriate proprietary paint variant for the best possible paint match.
Q: Why does ReveMoto require a VIN?
A: Ford made running production changes across multiple Bronco model years. Your VIN allows our fitment specialists to verify the correct hood configuration, ensure compatibility, and confirm the appropriate OEM components before production begins. It also helps our paint team apply the correct proprietary paint variant for the best possible paint match.
Q: How long does installation take?
A: Installation typically takes 1–2 hours using basic hand tools. Because this is a direct OEM replacement, no cutting, drilling, or vehicle programming is required.
Q: Does the hood arrive painted and ready to install?
A: Yes. Every Bronco Raptor Hood Conversion is professionally refinished in-house using premium Lesonal automotive coatings by AkzoNobel, quality inspected, securely packaged, and shipped ready for installation.
The ReveMoto Difference
Every ReveMoto Bronco Raptor Hood Conversion is professionally refinished in-house using premium Lesonal automotive coatings by AkzoNobel, supported by more than 12 years of paint matching experience, a dedicated in-house Research & Development team, and continuously refined proprietary paint formulas developed to deliver exceptional paint match accuracy. Every hood is carefully inspected before shipment to ensure outstanding paint quality, OEM fitment, and the level of craftsmanship customers have come to expect from ReveMoto.
Every painted hood undergoes:
✔ Paint Match Verification
✔ Paint Thickness Inspection
✔ Final Quality Control Review
✔ Protective Transit Packaging
✔ Lifetime Paint Warranty Coverage
